All the necessities from the Basic Tune plus a few more items directed at more complex systems.

• Clean bike
• Adjust shifting and lubricate shift cables
• Check hanger alignment
• Adjust brakes and reset/lubricate pistons
• True brake rotors as necessary
• Check and adjust headset and bottom bracket as necessary
• Check and adjust hubs as necessary
• Minor wheel true
• Inspect suspension linkage where applicable
• Inspect and lubricate dropper post where applicable
• Clean and lube all seals
• Bolt check entire bike
• Inflate tires to preferred PSI
• Lube chain
• Mechanic test ridden

Comprehensive servicing that includes all elements of the Basic Tune plus detailed cleaning, drivetrain cleaning and a full inspection of all components.

• Detail bike
• Removal and deep clean of drive train components
• Adjust shifting and check derailleur hanger alignment
• Replace shift cable and housing
• Replace drivetrain components as necessary
• Adjust brakes, replace brake cable/housing/pads as necessary
• Check and adjust headset/bottom bracket, replace as necessary
• Check and adjust hubs as necessary
• Wheel true, replace broken spokes as necessary
• Replace tubes and tires as necessary
• Bolt check entire bike
• Inflate tires to preferred PSI
• Lube chain, pivots and cables
• Install accessories if desired
• Mechanic test ridden

Specialized service for e-bikes, incorporating all Complete Tune elements plus an in-depth diagnostic of the electronic system, firmware updates, and battery health checks.

Please note that outside of flat repairs, our shop policy only allows us to service CLASS 1 E-Bikes. CLASS 1 E-Bikes in BC are E-bikes that are limited to 32 km/h and are pedal assist ONLY. We will not service any E-bikes with throttles.

• Detail bike
• Removal and deep clean of drive train components
• Adjust shifting, check derailleur hanger alignment
• Replace shift cable and housing
• Replace drivetrain components as necessary
• Adjust brakes, replace brake cable/housing/pads as necessary
• Check and adjust headset/bottom bracket, replace as necessary
• Check and adjust hubs as necessary
• Wheel true, replace broken spokes as necessary
• Replace tubes and tires as necessary
• Bolt check entire bike
• Inflate tires to preferred PSI
• Lube chain, pivots and cables
• Install accessories if desired
• Run diagnostic and error check of system: Bosch, Shimano, Fazua and TQ
• Set new next service interval
• Check lighting systems
• Mechanic test ridden

An extensive overhaul of your bike, covering all Complete Tune services along with brake bleeds, bearing overhauls and replacement of worn parts (labour included).

• Detail bike
• Removal and deep clean of drive train components
• Adjust shifting, check derailleur hanger alignment
• Replace shift cable and housing
• Replace drivetrain components as necessary
• Bleed both brakes where applicable
• Adjust brakes, replace brake cable/housing/pads as necessary
• Overhaul headset/bottom bracket, replace as necessary
• Overhaul both hubs
• Wheel true, replace broken spokes as necessary
• Replace tubes, tires, rim tape, valves, inserts, sealant as necessary
• Bolt check entire bike with torque wrench
• Inflate tires to preferred PSI
• Lube chain, pivots and cables
• Install accessories if desired
• Inspect bushing and bearing wear in applicable components and provide assessment and recommendations
• Mechanic test ridden